隨著經濟的快速發展，通風麻豆视频官网在生活中的用處越來越大。比如在餐廳，通風設備為消費者提供了良好的就餐環境，讓人們在餐廳吃得開心。下麵來看看濟南通風麻豆视频官网設計中應該注意的要點。

With the rapid development of economy, ventilation ducts are more and more useful in life. For example, in restaurants, ventilation equipment provides consumers with a good dining environment, allowing people to eat happily in restaurants. Now let's take a look at the key points that should be paid attention to in the design of Jinan ventilation pipeline.

一、先是應按某係統的某樓層通風麻豆视频官网進行繪製，並注明接口位置。

1、 Firstly, it shall be drawn according to the ventilation pipe of a certain floor of a system, and the interface position shall be indicated.

二、通風麻豆视频官网設計應進行編號，從起點開始編號，起點一般為接口位置，相同斷麵規格、相同長度節為同一號碼，除此應按順序編號。以便於組織製作施工。

2、 The design of ventilation ducts shall be numbered from the starting point. The starting point is generally the interface position, and the same section specification and length section are the same number. In addition, they shall be numbered in sequence. To facilitate the organization of fabrication and construction.

三、通風麻豆视频官网設計要標記支吊架位置，支吊架位置間距及材料規格要符後規範要求及工藝規定。

3、 The position of supports and hangers shall be marked in the design of ventilation ducts, and the spacing between supports and hangers and the material specifications shall conform to the following specification requirements and process regulations.

四、製作通風麻豆视频官网設應先考量彎頭與變徑滿足內外表麵同心彎管要求、變徑長度要求。

4、 The elbow and reducer shall meet the requirements of inner and outer concentric elbow and reducer length when designing the ventilation duct.

五、通風麻豆视频官网設計應標記起端與彎頭位置、變徑位置、管線所處軸線位置、管底標高。

5、 The position of the starting end and elbow, the reducing position, the axis position of the pipeline and the elevation of the pipe bottom shall be marked in the ventilation pipe design.

此外對充分的準備工作是確保風管安裝質量的前提。在準備淨化風管的製作時，無論是采取工廠集中製作還是現場製作方式，都保證場地的潔淨和封閉，並擁有符合條件的采光和照明條件。除此外，還要對製作好的方管進行看管，盡量避免汙染。

In addition, adequate preparation is the premise to ensure the installation quality of air duct. When preparing for the production of purified air duct, whether centralized production in the factory or on-site production is adopted, the site shall be clean and closed, and have qualified lighting and lighting conditions. In addition, the fabricated square tube shall be watched to avoid pollution as much as possible.

預製好的風管，是要做好存放工作，以免受到二次汙染。在使用風管前，要注意進行清洗工作，確定板材表麵無腐蝕，幹燥後不吸塵。關注麻豆精品国产传媒http://www.qzdzjx.com，了解更多相關事項！

The prefabricated air duct shall be stored well to avoid secondary pollution. Before using the air duct, pay attention to the cleaning work to ensure that the surface of the plate is free of corrosion and does not absorb dust after drying. Follow us http://www.qzdzjx.com , learn more about it!